It is known that the high humidity in the twisting workshop is conducive to reducing the generation of static electricity, drawing and twisting; However, if the humidity is too high, it will cause adhesion, block the inclined pipe and cause winding
Therefore, the temperature and humidity selection range of the twisting workshop is 32 ℃~33 ℃ in summer and 67%~70% in relative humidity; In winter, the temperature is 26 ℃~28 ℃, and the relative humidity is 63%~65%. At the same time, the temperature and humidity of the spinning front should be controlled reasonably to reduce the phenomenon of entanglement in production
If the humidity in the twisting workshop is below 40% RH, the strength of the yarn will be reduced, resulting in increased breakage, too loose winding, yarn hairiness, poor formation and increased flying. ZS-120Z twisting workshop humidifier and ZS series intelligent ultrasonic spray humidifier have small and even mist particles, which can quickly and widely solve practical problems in yarn production and improve product quality
Recently, after some textile workshops used industrial atomizing humidifiers in the twisting area, the phenomenon of sticking, winding, blocking and hanging was significantly reduced, which further stabilized and improved the product quality. There are many kinds of fibers produced in the workshop of the textile mill, which requires high temperature and humidity conditions in the workshop environment. When the temperature and humidity fail to meet the requirements, the phenomenon of sticking and winding is heavy, it is difficult to do in life, and it is difficult to twist into strips, which increases the labor intensity of the workers on duty and affects the product quality
In a word, the increase of broken ends and flying flowers is a comprehensive reflection of various factors such as process, equipment, operation, raw materials, temperature and humidity in the twisting process. When reducing broken ends, different control measures should be taken for general broken ends, repeated broken ends, local broken ends, and large area broken ends. Strengthening management can effectively reduce broken ends
In order to further improve the temperature and humidity conditions in the twisting workshop, the weaving factory workshop has installed and used ZS-120Z twisting workshop humidifier and ZS series intelligent ultrasonic spray humidifier in the twisting area, which can effectively reduce the generation of static electricity and reduce the effect of broken ends and flying flowers
If you are interested in fabric twisting workshop humidifier, twisting machine spray humidifier products, you can provide one-on-one customized textile factory workshop humidification, dust removal and cooling solutions for free
