June 04,2023

Dehumidifier in PV module workshop to help control humidity in PV module production

Industry  Dehumidifier_890 Series

dehumidifier in PV module workshop helps to control humidity in PV module production Today, with the development of new energy and the improvement of human environmental awareness, the PV industry is developing rapidly. PV module workshop has high requirements for humidity during production and processing. If the humidity is too low or too high, it will affect the quality of components and finished products, damage the integrated circuit and reduce the product quality

Therefore, it is very important to keep the humidity stable in the component workshop. In the daily processing process, the workshop can use the traditional humidity control method, but the humidity is not easy to control, the effect is not ideal, and the labor intensity is high. Therefore, more and more PV industry module workshops begin to use_ Photovoltaic module workshop dehumidifier and PD series intelligent humidity control dehumidifier control the humidity in the workshop

The ambient temperature and humidity range of PV module workshop is as follows:

1. Auxiliary material storage area: temperature control: 15-28 ℃, humidity control: 10% - 60% RH

2. Ambient temperature and humidity in the stacking area: EVA, backplane placement environment requirements, temperature: 15-28 ℃, humidity: 10% - 60% RH

3. Temperature control in the framing area: 15-28 ℃, humidity control at 30% - 70% RH

4. Temperature control in curing room area: 25 ± 2 ℃, humidity control 40% RH~85% RH

5. Temperature control in the power test area of the cleaning room: 25 ± 2 ℃, humidity control: 10% - 70% RH

6. Temperature control in other areas of the workshop: 18-40 ℃, humidity control: 10% - 60% RH

Generally speaking, the dust-free room in the PV module workshop is most suitable for controlling the temperature and humidity at 25 ± 2 ° C and 50% ± 2% RH. The air humidity shall not be condensed, which has little impact on the individual IV measurement of the PV module itself. Once condensation occurs, it is necessary to find ways to reduce the air humidity to ensure that the production of photovoltaic modules will not be affected

At this time_ The dehumidifier in the PV module workshop and PD series intelligent humidity control dehumidifier are of great use, and their operation can control the ambient air humidity in the PV module production line workshop to an ideal level. In this way, the condensed water in the workshop can be avoided from dropping on the battery panel of the production line, thus causing hidden trouble. Therefore, the development and utilization of new energy also has a contribution to the industrial dehumidifier! All the above contents about dehumidifier in PV module workshop and humidity control for PV module production are provided by Mashima Electric, for your reference only